Automatic Vicat Apparatus

The Automatic Vicat Apparatus 63-L3000 provides a  completely automatic method for determining the  initial and final setting time of cements or mortar  pastes. Advanced electronics technologies provide  superior performances and total flexibility. The  Automatic Vicat Apparatus 63-L3000 is easy to  operate and accurate in test results, can be an ideal  helper in your experiments.

Features:

• AUTOMATIC POSITION CALIBRATION Fully automatic, one-key operation, automatic accurate  position calibration;

• POSITION STORAGE After the position calibration is completed, it will be stored in  memory, no need to repeat the calibration

• AUTOMATIC TEST PROCESS  One-key operation, automatic penetration measurement, and  automatic lifting of components after completion;

• INTELLIGENT TEST CONTROL The penetration displacement value is displayed in real time,  no need for frequent visual inspection during the test;

• NO NEEDLE REPLACEMENT FOR INITIAL AND  FINAL SETTINGTEST The initial and final setting test needles are shared, reducing  costs and workload;

• INTELLIGENT JUDGMENT OF RESULTS Automatically judge the result data according to the requirements of the test specification, and prompt the operation;

• DATA REPORT STORAGE  Test data is automatically made into charts and stored; there  are RS485 communication, USB export and other interfaces.

Specifications:

• Time control: Time display resolution: 0.1S, Time control accuracy: ≤±0.1S, Using high-precision LVDT displacement sensor, split structure, no friction  when the needlefalls.

• Displacement: Range: 0-50mm Displacement display resolution: 0.01mm Relative displacement accuracy: 0.1mm

• Data storage: 200 sets

• Slide assembly: 300g ± 1g (including test rod/test needle), meets the requirements of the  standard;

• Interface: RS485 data output interface USB data export interface Supporting glass plate

• Accessories: Φ10 mm Consistency plunger, Φ1.13 mm needle,and Φ70/80mm conical mould to EN

  (Φ1 mm needle and Φ60/70mm conical mould to ASTM/AASHTO optional)

• Dimension: 390mm x 310mm ×575mm (length × width × height)

• Poower supply: 220±10%VAC/50Hz; maximum 40W

Features:

• AUTOMATIC POSITION CALIBRATION Fully automatic, one-key operation, automatic accurate  position calibration;

• POSITION STORAGE After the position calibration is completed, it will be stored in  memory, no need to repeat the calibration

• AUTOMATIC TEST PROCESS  One-key operation, automatic penetration measurement, and  automatic lifting of components after completion;

• INTELLIGENT TEST CONTROL The penetration displacement value is displayed in real time,  no need for frequent visual inspection during the test;

• NO NEEDLE REPLACEMENT FOR INITIAL AND  FINAL SETTINGTEST The initial and final setting test needles are shared, reducing  costs and workload;

• INTELLIGENT JUDGMENT OF RESULTS Automatically judge the result data according to the requirements of the test specification, and prompt the operation;

• DATA REPORT STORAGE  Test data is automatically made into charts and stored; there  are RS485 communication, USB export and other interfaces.

Specifications:

• Time control: Time display resolution: 0.1S, Time control accuracy: ≤±0.1S, Using high-precision LVDT displacement sensor, split structure, no friction  when the needlefalls.

• Displacement: Range: 0-50mm Displacement display resolution: 0.01mm Relative displacement accuracy: 0.1mm

• Data storage: 200 sets

• Slide assembly: 300g ± 1g (including test rod/test needle), meets the requirements of the  standard;

• Interface: RS485 data output interface USB data export interface Supporting glass plate

• Accessories: Φ10 mm Consistency plunger, Φ1.13 mm needleand, Φ70/80mm conical mould to EN (Φ1 mm needle and Φ60/70mm conical mould to ASTM/AASHTO optional)

• Dimension: 390mm x 310mm ×575mm (length × width × height)

• Poower supply: 220±10%VAC/50Hz; maximum 40W

Accessories: 

Φ10 mm Consistency plunger, 

Φ1.13 mm needle, 

Φ70/80mm conical mould to EN.

(Φ1 mm needle and Φ60/70mm conical mould to ASTM/AASHTO optional)