MARSHALL STABILITY TESTER

STANDARD:  EN 12697-34 ASTM D1559 ASTM D5581 AASHTO T245 NF P98-252-2

The Marshall Stability Tester is used by highway departments,  contractors, engineers, testing laboratories and other government  agencies to determine the stability and flow value of the bituminous  mixture. It can accurately judge the failure point of bituminous  mixture to provide a basis for the design of the ratio of bituminous  mixture, and can also be used to test the construction quality of  asphalt pavements. The equipment can be used for other related tests by replacing  different test fixtures. Touch screen control, simple to operate,  real-time data display, and it can be connected to an A4 printer or thermal printer to print test results directly.

Specifications:

Maximum load: 50kN

Stability range:≤40kN

Stability error:≤±0.1kN

Flow value range: 0-20mm

Flow value error: ≤±0.05mm

Platen speed:50±5mm/min

Interface: equipped with serial output, network interface, connect to laser A4 printer

Motor power: 400W